The big project this month (or indeed this year) was the replacement of the flooring in the main section of the cabin. It’s almost 600 square feet, and up until now has been a collection of mis-matched and crumbling vinyl sheet goods, rotting old industrial carpet, and bare plywood. All uneven and tattered and really, really ugly. Even with rugs down the ugly came through.
The replacement wasn’t easy as it could only be done in sections; there was no place to move everything to in order to get one big empty space to work in and on. So I compressed everything into one end of the building and got at it.
There were places where the subfloor was rotted due to past roof leaks. Mould clung to the old vinyl as well. Clean-up, cut out, throw out. After that new underlay had to go down to build up the level to where the end vinyl planking would match the existing tile kitchen and bath floors, as well as the laminate I succeeded in installing in the bedroom last year. Vinyl was the only choice here, as the floor structure and surface and very uneven. It slopes off in various directions and dips and rises. “Undulates” would be one way of describing it.
Here are some of the progress pictures. Even though you can’t see what it started out like, you can see it is now much better. Not done yet, of course; it’s a house and houses are never finished.
Of course most of it will be covered in furniture and rugs (dogs slip on vinyl) anyway but it will be contiguous, and even (but not level) wherever it is.
If you’re wondering why I didn’t level the whole thing and put in, say, hardwood I assure you that was not a practical option: straightening up a log cabin that was built wrong to begin with and then had 70 years to settle as it wished is not a simple thing. Most likely it would have suffered major structural damage with any attempt to rapidly push it back to level, and as for other methods of flattening the surface (like self-leveling concrete) the distortion was too extreme for that to be viable. Example: I measured one spot as sloping 2″ in 4′, far beyond what can be simply filled or raised with shims.
We’re not after ‘perfect’ here. That would require a complete replacement of the whole building. Just “good enough”, and certainly far better than it’s ever been.